Point load tester
Thông số cơ bản
| Tiêu chuẩn: | PAS 1075:2019 Appendix A3.PAS |
| Ứng dụng: | Determination of resistance to slow crack growth |
| Công nghệ phân tích: | |
| Nhà cung cấp: | Sciteq |
| Model: | Point load tester PLT |
Công Ty TNHH Beta Technology chịu trách nhiệm phân phối chính hãng, mọi thắc mắc xin liên hệ số điện thoại 0903.042.747 hoặc email sales@betatechco.com để được hỗ trợ!
The SCITEQ Point Load tester is used for determining the resistance to slow crack growth of polyethylene pipes with external point load. Complying with the standard PAS 1075:2009 Annex A3. PAS 1075
Description
The Point load tester system complies with the standard PAS 1075:2009 Annex A3. PAS 1075 defines characteristics, requirements and test methods for pipes made of PE for alternative installation procedures.
The Point load tester system consists of three main parts, namely the PLT pressure station cabinet, the PLT thermo tank and the PLT frames with the circular 4-screw point load testing unit and end closures.
A pipe sample mounted with end closures is placed in the open PLT frame where the pipe sample rests on the frame. Subsequently the PLT unit is mounted on the frame and the four PLT screws are fixed on the pipe sample and adjusted. The PLT frame is ready to be emerged into the thermo tank where the pipe sample can be aired out and pressurized.
For more information and technical specifications please see the brochure.
Associated equipment to the point load tester
Associated equipment
- X-ACT modular pressure
- ECO-line thermo tanks 0 – 95 C
- Laboratory saw
- End closures with tie-bar. Model 1530 & 1550
Standards:
- PAS 1075
