Friability Tester w/Printer FAB-2SP

FRIABILITY TESTER W/PRINTER FAB-2SP

Describe Friability Tester w/Printer FAB-2SP

• Logan Friability Tester w/ Printer FAB-2SP is a double-drum tablet friability test instrument manufactured in compliance with the USP, Europe, and other Pharmacopoeias.
• Testing criteria of mechanical strength of tablets and cores are friability and abrasion testing.
• During the process of coating, transportation, packing etc. the tablet will lose some mass. To measure the mass loss the samples are counted and weighed.
• Thereafter the friability test performs following the individual monographs of the Pharmacopoeia.
• When finished the samples have to be dusted and weighed again. The difference between the weight before and after the test is determined as friability, which usually should not exceed 1%.
• Friability Tester w/ Printer FAB-2SP has the calculation function; user can transfer the tablet weight before and after the test. Such weight can be transferred from balance directly or by manual input.
• The % of the weight lost can be calculated with the FAB-2SP, the test method and test results are printed with an equipped online printer.
• The standard friability drum causes the samples to roll and fall during the test while the abrasion drum continuously stresses the sample by abrasion of lamellas.
• FAB-2SP can be used with 1 or 2 drums.  A noiseless gear motor rotates the drums with user setting speed of 20-70 RPM.
• The actual drum is made from Plexiglas and is separated into two parts, the drum body and a removable cover, opened to fill, discharge and clean the drum inside when required.
• The instrument itself is made from high quality metal which meets in full the actual GLP requirements.

Optional 10 Degree Angle Stand

• Tablets of a weight >650mg or with a bigger diameter or odd shaped samples are tested while the instrument is raised to an angle of 10° on one side using collapsible feet.

Optional Abrasion Drums

• The standard supply scope includes the friability drums, but abrasion drums are available as options.
• The standard friability drum causes the samples to roll and fall during the test while the abrasion drum continuously puts the sample under stress by contact with lamellas.

Integrated Report Printer (optional)

• As an option FAB-2SP features an integrated report printer to document the test and calibration results.
• An integrated printer saves valuable bench space in your laboratory.

Calibration

• FAB-2SP features dedicated calibration programs.
• The user is guided through each step of the calibration and a report is printed automatically.
• The reports are saved on the instrument and can be printed at a later time as well.

Advantages

• Plastic drum with lid that is easy to open for sample loading and cleaning
• LCD screen , keyboard on the body
• Built-in printer ( Option)
• Powerful motor to drive the drum
• Microprocessor technology control system
• Automatic sample discharge at the end of the test run
• Dual operation mode: number of revolutions or rotation time
• Variable drum rotation speed
• IQ/OQ documents included free of charge

Standard Scope of Supply FAB-2SP comes ready to use with the following standard scope of supply:

• Programmable Friability Tester
• (controls 2 drums) Includes: Programmable Drive Module w / Selectable
• Timer or Number of Rotation
• Plastic Drum & Cover Left.
• Plastic Drum & Cover Right
• IQ/OQ documents included
• User manual

Options In addition to the standard scope of supply Logan offers a broad range of accessories and options including:

• Friability drum
• 10° stand to test large samples
• Thermo printer
• Certified calibration tools

Betatechco Websites↓

• Betatechco
• Thiết bị hóa nghiệm
• Thí nghiệm xăng